3D Stained Glass: Boxes!

EXPERIENCE REQUIRED

This is an intermediate class that requires some experience in the stained glass world. We expect that you know how to cut, grind, and shape glass, and that you are familiar with standard stained glass tools and best practices. Your experience does not have to be in our shop, and you don't have to be an expert. If you do not have previous experience, sign up for our intro class here.

Welcome to our intermediate copper foil class! This class will utilize the same skills as the intro to stained glass class, but will go over the process of creating three-dimensional pieces and adding hinges and box chains (optional).

In this class you will:

• Learn about two different types to construct a box and how to adjust patterns for each method.

• Cut, grind, fit and foil your glass. Learn how to use The Grinder straight edge to make the box sides and bottom.

• Solder your foiled box and lid.

• Attach hinges and box chain.

• Polish box.

• Go home with a finished piece!

This is an all-inclusive class that you will leave knowing the process of making a three-dimensional piece from start to finish. These skills will expand your craft and open a whole new world of possibilities!

A variety of lid patterns are available for this class. Once you register, you will get an email from the instructor where you can pick your lid pattern and your final shape (square vs rectangle). The instructor will cut all patterns out of vinyl before class, so if you've never worked with vinyl patterns before you'll get a chance to try it out. This will eliminate time spent cutting out pattern pieces and allow for more time for working on your piece.

We will be using lead-free solder for this class, however, we do not have lead-free soldering irons, so there may be traces of lead in the finished product.

CLASS PRICE

$210 for non-members

Members get 25% off!

Class cost includes:

• Consumables (glass, copper foil, solder, hinges, box chain, flux, polish, etc.)
• Tool shop use

AGENDA

• Safety
• Glass selection
• Glass cutting and grinding
• Foiling and burnishing
• Soldering and Box Assembly

***PLEASE READ ALL DETAILS BELOW PRIOR TO REGISTERING FOR THIS CLASS***

EXPERIENCE REQUIRED

This is an intermediate class that requires some experience in the stained glass world. We expect that you know how to cut, grind, and shape glass, and that you are familiar with standard stained glass tools and best practices. Your experience does not have to be in our shop, and you don't have to be an expert.

CANCELLATION POLICY

If you need to cancel your RSVP, the following policy applies:

• 7+ days away: full refund, please contact instructor for refund instructions.
• 3+ days away: 50% refund, please contact instructor for refund instructions.
• Less than 2 days: no refund*, your registration is non-transferable and is considered a donation to the shop

Cancellation does not automatically get you an opportunity to reschedule. Any rescheduling is subject to existing class availability and instructor's discretion.

NO-SHOW POLICY

A no-show with no proof of timestamped attempted contact prior to the start of the class will forfeit the class fees and the funds will be considered a donation to Tinkermill, even if due to illness. Even if the instructor does not get the message before class, if there is a timestamp to show there was an attempt, it'll count as prior contact. This can be via email, Slack message, carrier pigeon, etc.

* If the need to cancel or a no-show is beyond your control, please speak with the instructor to discuss. Resolution is subject to instructor's discretion.

ATTIRE - COME PREPARED:

Closed-toed shoes and pants (or wearing a lap covering like an apron) long enough to cover down to your knees at a minimum are required for safety reasons. There is always a risk of hot solder splatter or glass shards as projectiles while creating stained glass art.

It is very easy to get minor cuts on your hands during glass work. We have a first aid kit and bandages on hand, but please note that you may get nicks or cuts on your hands or fingers during this class. If you have a medical bleeding disorder or similar health risk with skin wounds, please keep this notice in mind.

AGE RESTRICTION:

Class is open to anyone 18+ or those between ages of 16-17 with a parent/guardian is also in attendance as another attendee. No exceptions.

TOXIC MATERIALS WARNING:

This craft and class typically involves physical contact with LEAD, a material known to potentially cause bodily and/or reproductive harm with certain exposures, especially if ingested. We have a heavy-metals removing hand soap available in the shop for handwashing, as well as nitrile gloves available if you wish to eliminate/reduce physical contact. Feel free to bring gloves of your own if you wish, but you will need finger dexterity (so nitrile-dipped gloves are good, heavy leather work gloves are a bad idea).

In general, students are told to wash their hands thoroughly after handling any solder, any finished pieces, and any tools used in the shop - just don't lick the solder or any finished pieces, eat with unwashed hands after touching anything in the shop, and they should be fine.

Please note, we will be using lead-free solder for this class, however, we do not have lead-free soldering irons, so there may be traces of lead in the finished product.

LONG DAY REMINDER:

This is a 6-8 HOUR class in a single day. If you think you'll need it, please bring a snack with you, as we do not have any to give out, but we do have a lunch break built in around the middle point of the agenda. Please bring a water bottle or other drink with a lid to keep hydrated, though. We can refill water bottles here! We do also have a variety of soft drinks, fizzy water, and kombucha available for purchase.

If you have questions, please contact your instructor.

Not a member yet? We invite and encourage you to become a member. Members receive a discounted price on all classes and enjoy other benefits as well including independent access to our shops after certification. Interested? Learn more and sign up online at tinkermill.org.